Image Scanner
fi-800R
Operator's Guide
Image Scanner fi-800R Operator's Guide
To View This Manual
Introduction
Manuals
Trademarks
Manufacturer
Issue Date/Issuer
Safety Information
Symbols Used in This Manual
Abbreviations Used in This Manual
Arrow Symbols in This Manual
Screen Examples in This Manual
Conditions on Licenses for the Open Source Software
Notice
Scanner Overview
Main Features
Parts and Functions
About the LED Indicator
Installing the Software
Overview of the Bundled Software
System Requirements
Installation (Recommended)
Installation (Custom)
Basic Operations
Turning the Power ON/OFF
How to Turn the Power ON
How to Turn the Power OFF
Entering and Resuming from Power Saving Mode
Setting Up the ADF Paper Chute (Feeder)
Opening/Closing the ADF
How to Open the ADF
How to Close the ADF
How to Perform a Basic Scan
Performing a Scan with an Image Scanning Application
Using a Button on the Scanner to Start Scanning
Button Settings
Operations on the Scanner
How to Load Documents
Loading Documents
Preparation (When Loading Multiple Documents)
How to Load Documents
Documents for Scanning
Paper Size
Document Type
Document Thickness (Paper Weight)
Documents That May Not Be Scanned Successfully
Documents That Must Not Be Scanned
Precautions
Loading Capacity
Area Not to Be Perforated
Conditions Required to Accurately Detect Overlapped Documents (Multifeed)
Conditions for Mixed Batch Scanning
Conditions for Automatic Page Size Detection
Conditions for Using the Carrier Sheet
Conditions for Using the Photo Carrier Sheet
Conditions for Using the Booklet Carrier Sheet
Various Ways to Scan
Scanning Documents with Different Widths
Scanning Documents Folded in Half
Scanning Documents such as Envelopes or Multi-Layered Transfer Paper
Scanning Documents Larger than A4/Letter Size
Scanning Photographs and Clippings without Damaging Them
Scanning Booklets such as Passports without Damaging Them
Scanning Long Page Documents
Configuring Not to Detect Certain Overlap Patterns
Operational Procedure
Daily Care
Cleaning Materials
Location and Frequency
Cleaning the Outside of the Scanner
Cleaning the Inside of the Scanner (ADF) with Cleaning Paper
Cleaning the Inside of the Scanner (ADF) with a Cloth
Cleaning the (Carrier) Sheet
Replacing the Consumables
Consumables and Replacement Cycles
Replacing the Pad Unit
Replacing the Pick Roller
Troubleshooting
When a Paper Jam Occurs
Errors
Paper Jam
Document loading error
Multifeed
Skew Detected
Sensor(s) dirty
Cover Open
Optical Error
EEPROM Error
Sensor Error
Image Memory Read-Write Error
Memory Error
LSI Error
RAM Error
Operator Panel Error
Scanner Internal Error
Being Used by Others
Scanning Has Been Paused by the User
Outside designated scan area error
Invalid Command
Troubleshooting
The Scanner Cannot Be Powered ON
Cannot Connect the Scanner and a Computer via a USB Cable
The Stacker is Not Closed Automatically
Abnormal Noise Is Generated from the Scanner
Scanning Does Not Start
Scanning Takes a Long Time
The Quality of a Scanned Image of a Picture or Photo Is Poor
Quality of Scanned Text or Lines Is Unsatisfactory
Images Are Distorted or Not Clear
Vertical Streaks Appear on the Images
Overlapped Documents Are Frequently Fed into the Scanner
Situation in Which the Document Is not Fed into the ADF Occurs Frequently
Paper Jams/Pick Errors Occur Frequently
Images Turn Out Elongated
A Shadow Appears at the Top or the Bottom of the Image
There Are Black Traces on the Document
The Upper Part of the Scanned Image Appears Missing
The (Carrier) Sheet Is Not Fed Smoothly or a Jam Occurs
Part of the Image Appears Missing in the Case Where the (Carrier) Sheet Is Used
The First Measures to Take When You Encounter any Errors or Troubles
Before You Contact the Scanner Service Provider
General
Error Status
Checking the Product Label
Scanner Settings (Software Operation Panel)
Starting Up the Software Operation Panel
Setting the Software Operation Panel to [View Only mode]
Setting [View Only mode]
Exiting [View Only mode]
Setting a Password
Changing the Password
Clearing the Password
Resetting the Password
Setting Items
Device Setting
Device Setting 2
Settings Related to Sheet Counters
Checking the Sheet Counters
Clearing the Sheet Counters
Messages for Cleaning or Replacing Consumables
Scanner Cleaning Cycle [Cleaning Cycle]
Specifying the Cycle to Replace Consumables [Life Counter Alarm Setting]
Settings Related to Scanning
Adjusting the Position to Start the Scan [Offset Setting/Vertical magnification Adjustment]
Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler (U-turn)]
Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler (Return)]
Configuring the Scan Setting to Drop Out Specified Colors When Scanning [Dropout color]
Specifying the Number of Feeding Retries [Number of paper feeding retries]
Cropping the Image Boundary [AutoCrop Boundary]
Scanning at High Altitude [High Altitude Mode]
Specifying the USB Operation [USB]
Detecting a Skewed Document [Paper Protection (Return)]
Settings Related to the Detection for Overlapped Documents (Multifeed)
Specifying a Method to Detect Overlapped Documents [Multifeed]
Specifying the Area to Detect Overlapped Documents [Document check area specification for Multifeed Detection]
Setting to Ignore Certain Overlap Patterns [Intelligent Multifeed Function]
Settings Related to Waiting Time
Waiting Time for the Scanner to Enter Power Saving Mode [Power saving]
Waiting Time That Lasts until The Stacker Starts to Close Automatically [Stacker Close Delay]
Settings Related to Power On/Off and Start up of the Scanner
Method of Turning the Scanner ON/OFF [Power Switch Control]
Settings Related to Scanner Maintenance
Detecting Vertical Streaks [Vertical Streak Detection]
Specifying the Sensitivity Level for Vertical Streak Detection [Vertical Streak Sensitivity]
Appendix
Basic Specification
Installation Specification
Outer Dimensions
Scanner Options
Uninstalling the Software
Contact for Inquiries