Indications on LCD
Display |
Description |
---|---|
Processing initialization. |
|
Ready to start scanning. Indicates that the initialization was successfully completed. For more details about the indicators, refer to About the Indicators. |
|
An item from the menu can be selected. When you press the [Menu] button in the [Ready] screen, the [Main Menu] screen is displayed. The Main Menu can be used to configure various operational settings upon scanning. For details about the Main Menu screen, refer to How to Use the Main Menu. |
|
A function can be selected. When you press the [Function/Enter] button in the [Ready] screen, [Function Selection] is displayed. By using Function Selection, you can configure an application to be launched when the [Send to] button is pressed. For details about the Function Selection screen, refer to How to Use Function Selection. |
|
Indicates that a recoverable error occurred during scanning. Error codes beginning with the letter "J" or "U" are displayed. For details about errors, refer to Errors. You can clear the error display by pressing the [Clear/Back] or the [Stop] button. Note that if the error is "Paper jam", the message disappears after a certain amount of time elapses with no documents ([Ready] status) in the scanner. |
|
Indicates that a device error occurred during initialization or scanning. Error codes beginning with the letter "E", "F", "C", "H", "A" or "L" are displayed. For details about errors, refer to Errors. When this indication of a device error is displayed, turn the power off then back on from the main power switch. If the indication continues to appear after turning the power back on, contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety Precautions bundled with this product and make an inquiry. |
|
If the scanner is not operated for the length of time that is set for the sleep interval, it enters power saving mode. Press any button on the operator panel to return to the previous screen. |