How to Use the Main Menu
This section explains the Main Menu.
When you press the [Menu] button in the [Ready] screen, the [Main Menu] screen is displayed.
The Main Menu can be used to configure various operational settings upon scanning.
This section explains how to use the Main Menu of the operator panel according to the following categories.
Operation |
Description |
Setting Item |
---|---|---|
Operational Settings |
You can configure various settings for operating the scanner and using the operator panel. For more details about settings, refer to Operational Settings. |
1: iMFF Setting 2: No. of Paper Feed Retries 3: Pick Speed 4: Soft Pick Setting 5: Manual Feed Timeout 6: Paper Protection 7: MF Quick Change 8: Alarm Volume 9: Stacker Positioning 10: Hopper Level 11: Paper Separation Force 12: Alarm Sound Time 13: Button Sound Vol 14: Contrast 15: Backlight ON 16: LED Blink Cycle 17: Horizontal Scroll Speed 18: Operation Panel Timeout 19: Language 20: Prioritize Panel Settings 24: Ope. Panel Initialization 26: Low-speed Feed Mode 27: Automatic Separation Control 28: Stacking Control |
Cleaning the scanner |
You can clean the scanner by using materials such as the Cleaning Sheet. For more details, refer to Daily Care. |
21: Cleaning |
Test print for Imprinter |
You can run a test print when the imprinter is installed. For more details, refer to the "fi-680PRF/PRB Imprinter Operator's Guide". |
22: Test Print |
Checking and resetting the consumables/cleaning counter |
You can check the replacement cycle of the consumables and the total page count of the maintenance parts. Also use it to reset the counter when you have replaced the consumables or performed cleaning. For more details, refer to Checking and Resetting the Counters. |
23: Show/Clear Counters |
Checking the number of sheets scanned |
Compare the number of sheets scanned in Doc Counting Mode and Doc Count Check Mode. For more details, refer to Checking the number of sheets scanned. |
25: Doc Counting Mode |
Checking the information |
appears when a message for replacing consumables/cleaning/replacing maintenance parts/regular maintenance is displayed. Read the message and take measures accordingly. For more details, refer to Checking the Information. |
Information |