Icons on the Touch Screen
In the lower part of the touch screen, the following icons are displayed:
The following is an example screen when the scanner is connected via a USB cable.
- (1) / /
-
You can check the connection method of the scanner.
For details, refer to Connection Method.
When the scanner is connected via Wi-Fi, press the icon to display the [Wi-Fi Diagnosis] screen, and check the Wi-Fi connection status.
- (2)
-
You can check the settings, messages and Help for the scanner.
When there is a message, is displayed.
Press the icon to display the message.
For details, refer to Notification.
- (3)
-
You can check or change the settings for the scanner.
Press the icon to display a list of setting items.
For details, refer to Settings.
- (4)
-
Go back to the previous screen.
Press and hold this to go back to the main screen in accordance with the connection method.
Connection Method
Connection Method |
Icon |
Connection Status |
---|---|---|
Wi-Fi |
(Strong) (Medium) (Weak) |
The scanner is connected via Wi-Fi. The signal strength is displayed in three levels. |
The scanner is not connected via Wi-Fi. |
||
Wired LAN |
The scanner is connected via a wired LAN. |
|
The scanner is not connected via a wired LAN. |
||
USB |
The scanner is connected via a USB cable. |
|
The scanner is not connected via a USB cable. |
Notification
Tab |
Overview |
---|---|
Information |
You can check the following settings.
|
Message |
You can check messages for consumable replacement, cleaning, glass cleaning, and maintenance. |
Help |
You can check how to load documents and how to clean the scanner. |
Settings
Item |
Overview |
|
---|---|---|
Scanner Information |
You can check the settings for the scanner.
|
|
Paper Source/Feeding |
Paper Feeding |
You can specify the timing of when document feeding is started. Change this setting when overlapped documents and paper jams occur frequently.
|
Document Count |
The number of documents can be counted without outputting images of the documents.
|
|
Display language |
You can configure the language setting for the touch screen. |
|
Cleaning & Maintenance |
Vertical Streak Detection |
You can configure the settings for detecting dirt on the glass. If the scanner detects dirt on the glass, the touch screen displays a notification on when you receive a [Clean glass!] message. Clean the glass when you receive a message. |
Cleaning |
Use this setting when you clean the inside of the scanner.
|
|
Consumable counters |
You can check the number of sheets scanned. After you replace a consumable or clean the scanner, you can clear the counter. |
|
Scanner Settings |
An administrator of the scanner uses this to configure the settings for the scanner.
|
|
Authentication/License |
You can check the conditions of the licenses for the authentication label and open source software. |
|
Limited Warranty Guide/Warranty Information |
The limited warranty guide or warranty information can be checked. Note that this is not displayed depending on the country or region where the scanner is purchased. |
|
Maintenance |
Service engineers use this for maintenance of the scanner. |