Feeding [Pick Speed]

You can specify the timing of when document feeding is started.

When overlapped documents or paper jams occur frequently, delaying the timing of document feeding may improve the performance.

This setting is effective when you scan thin paper.

  1. Start up the Software Operation Panel.

    For details, refer to Starting Up the Software Operation Panel.

  2. From the list on the left, select [Device Setting 2] → [Pick Speed].
    Pick Speed
  3. Select the feeding speed.
    Normal

    This is the optimum feeding speed.

    This is the factory default setting.

    Slower

    The timing of document feeding is delayed more than [Normal].

    ATTENTION

    The total time for scanning is longer because the timing of document feeding is delayed.