Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler (Automatic Page Size Detection)]
When scanning in Automatic Page Size Detection, depending on the condition of the document that you scan, some shadow of the document may be reflected onto the edge of the image and appear as black streaks.
In this case, you can improve the image quality around the edges by using the Page Edge Filler function to fill around the edges.
-
From the listing on the left, select [Device Setting 2] → [Page Edge Filler (Automatic Page Size Detection)].
-
Specify the width of each margin to fill: top, bottom, right, and left.
T: Top = 0 to 7.5 mm
B: Bottom = 0 to 7.5 mm
R: Right = 0 to 7.5 mm
L: Left = 0 to 7.5 mm
(in 0.5 mm increments)
The specified area is filled in the same color as the background.
ATTENTIONNote that if the target range of the Page Edge Filler is too wide, some characters near the edge may be cut out.
Unless Automatic Page Size Detection is specified, the setting of [Page Edge Filler (ADF)] is applied. For details, refer to Removing Shadows/Streaks that Appear around Edges of Images [Page Edge Filler (ADF)].
HINTThis setting can also be configured in the scanner driver's setup dialog box. Note that priority is given to the setting with a larger value.