Device Setting
-
Start up the Software Operation Panel.
For details, refer to Starting Up the Software Operation Panel.
-
From the list on the left, select [Device Setting] and click the [Offset] button.
The [Offset] window appears.
Items that can be configured in these windows are as follows:
Setting Item
Description
The status of each consumable part can be viewed to determine when to replace or clean the consumables.
When you have replaced or cleaned a consumable part, clear the corresponding counter.
Specify the waiting time before the scanner enters power saving mode.
Specify a starting position for scanning.
Specify the magnification level for the feed direction.