Scan Settings for Documents with Tabs/Non-rectangular Documents [Scan Setting for Document with Tab (Automatic Page Size Detection)]

For documents with index stickers or index tabs attached on the end, you can scan the whole document including its attachments with Automatic Page Size Detection.

Start up the Software Operation Panel.

Refer to Starting Up the Software Operation Panel.
From the listing on the left, select [Device Setting 2] → [Scan Setting for Document with Tab (Automatic Page Size Detection)].

Select [Document with tab], [Document without tab] or [Non-rectangular document].

Item	Description
Document with tab	Scans up to 20 mm off the bottom edge of the document with a tab.
Document without tab	Stops the scan when it detects the bottom edge of the document.
Non-rectangular document	Scans up to 120 mm off the bottom edge of the detected document.

ATTENTION

The scanning speed slows down when you select [Document with tab] or [Non-rectangular document].
To scan documents with tabs or non-rectangular documents, refer to Loading Documents with Tabs or Non-rectangular Documents.
For information on how to configure Automatic Page Size Detection, refer to the help for the scanner driver.