Setting the Function for Scanning Slowly at Low Resolution [Low-speed Feed Mode]

When scanning at low resolution (lower than 400 dpi), you can set a slow speed for scanning documents regardless of the resolution that is set. This setting is effective for scanning long page documents.

  1. Start up the Software Operation Panel.

    Refer to Starting Up the Software Operation Panel.

  2. From the list on the left, select [Device Setting 2] → [Low-speed Feed Mode].
    Low-speed Feed Mode
  3. Select whether to enable or disable [Low-speed Feed Mode].
    HINT

    This setting can also be configured from the operator panel.