Specifying the Interval to Feed the Documents [Set the interval for feeding sheets]

If the bottom of the scanned image is partially missing due to a large skew when scanning in Automatic Page Size Detection, specify a longer interval to feed the documents.

Specifying a longer interval leaves more time between each document to be scanned.

  1. Start up the Software Operation Panel.

    Refer to Starting Up the Software Operation Panel.

  2. From the listing on the left, select [Device Setting 2] → [Set the interval for feeding sheets].
    Set the interval for feeding sheets
  3. Specify the paper feeding interval.

    You can select from [Short (Default)] to [Long] (in four levels).

    ATTENTION

    Note that it takes more time for scanning as the paper feeding interval becomes longer.