Setting for Multifeed Detection in Manual Feeding [Multifeed detection when scanning in manual feeding mode]

Configure this setting when you want to enable multifeed detection for scanning in Manual Feed mode.

  1. Start up the Software Operation Panel.

    Refer to Starting Up the Software Operation Panel.

  2. From the listing on the left, select [Device Setting 2] → [Multifeed detection when scanning in manual feeding mode].
    Multifeed Detection
  3. Select a detection method.

    Detection

    Description

    Disable

    Does not detect multifeeds.

    Follow driver settings

    Detects multifeeds if multifeed detection is enabled in the scanner driver settings.