Checking the Sheet Counters

The status of each consumable part can be viewed to determine when to replace the consumables.

The background color of the counter changes as it gets closer to the time to replace the consumables.

The background color of the roller set counter turns light yellow when the number of sheets scanned reaches 95,000, and turns yellow when it reaches 100,000.

For details about replacement cycles, refer to Consumables and Replacement Cycles.

  1. Start up the Software Operation Panel.

    For details, refer to Starting Up the Software Operation Panel.

  2. From the list on the left, select [Device Setting].
    Checking the Sheet Counters

    In this window, you can check the following items:

    Total Count (ADF)

    Total number of sheets scanned using the ADF

    Roller Set

    Displays the number of sheets scanned after the roller set is replaced.

    The number increases in increments of 500 sheets.

    The factory default setting for each counter is "0".

    ATTENTION

    If the scanner was turned off by unplugging the power cable, the number of sheets may not be counted in [Total Count (ADF)].