Specifying the Number of Retries for Paper Feeding [Number of paper feeding retries]

Specify the number of feeding retries when a document is not fed from the ADF paper chute (feeder).

  1. Start up the Software Operation Panel.

    For details, refer to Starting Up the Software Operation Panel.

  2. From the list on the left, select [Device Setting 2] → [Number of paper feeding retries].
  3. Specify the number of paper feeding retries.

    The value can range from 1 to 12 times.

    The factory default setting is "3 times".

    HINT

    For fi-8190/fi-8290/fi-8170/fi-8270, this setting can also be configured in the operator panel.