Specifying the Sensitivity Level for Paper Protection [Paper Protection Sensitivity]

Specify the sensitivity level for detecting feeding errors when the paper protection function is enabled.

Documents are skewed abnormally or paper jam noise is made when documents are not being fed properly.

Specify the sensitivity level to detect an abnormal document skew or paper jam noise.

ATTENTION

fi-8190/fi-8290/fi-8170/fi-8270 is supported to detect paper jam noise.

Start up the Software Operation Panel.

For details, refer to Starting Up the Software Operation Panel.
From the list on the left, select [Device Setting 2] → [Paper Protection Sensitivity].
Select the sensitivity level.
- For fi-8190/fi-8290/fi-8170/fi-8270
  - Select the sensitivity level to detect [Feeding Skew].
    
    Normal
    
    Detects an abnormal document skew with the optimum sensitivity.
    
    This is the factory default setting.
    
    High
    
    Increases the sensitivity level to detect an abnormal document skew.
    
    Specify this to detect an abnormal document skew even if there is a slight skew in the document.
    
    HINT
    
    To detect an abnormal document skew immediately and stop the scan, select [High].
  - Select the sensitivity level to detect [Feeding Noise].
    
    Low
    
    Decreases the sensitivity level to detect paper jam noise.
    
    Specify this to detect only loud paper jam noise.
    
    Normal
    
    Detects paper jam noise with the optimum sensitivity level.
    
    This is the factory default setting.
    
    High
    
    Increases the sensitivity level to detect paper jam noise.
    
    Specify this to detect even slight paper jam noise.
    HINT
    
    To detect paper jam noise immediately and stop the scan, select [High].
    
    If scanning stops frequently due to the paper protection function, select [Low].
    
    This setting can also be configured in the operator panel.
- For fi-8150/fi-8250/fi-8150U/fi-8250U
  
  Select the sensitivity level to detect [Feeding Skew].
  
  Normal
  
  Detects an abnormal document skew with the optimum sensitivity.
  
  This is the factory default setting.
  
  High
  
  Increases the sensitivity level to detect an abnormal document skew.
  
  Specify this to detect an abnormal document skew even if there is a slight skew in the document.
  
  HINT
  
  To detect an abnormal document skew immediately and stop the scan, select [High].