Settings for Saving the Power Consumption of the Scanner (ECO Mode)

When performing a scan at a low resolution (300 dpi or less), the scan is performed at a slow speed, which saves the power consumption of the scanner.

When this is enabled, the scanning speed is as follows:

  • For fi-8190/fi-8290/fi-8170/fi-8270

    Scanning is performed at the same speed as performing a scan at 600 dpi.

  • For fi-8150/fi-8250/fi-8150U/fi-8250U

    Scanning is performed at the same speed as performing a scan at 400 dpi.

  1. Start up the Software Operation Panel.

    For details, refer to Starting Up the Software Operation Panel.

  2. From the list on the left, select [Device Setting 2] → [ECO Mode].
  3. Select [Enable] to save the power consumption of the scanner.

    The factory default setting is [Disable].

    HINT

    For fi-8190/fi-8290/fi-8170/fi-8270, this setting can also be configured in the operator panel.