Settings to Use the Scanner Only via the USB Connection [Network Function] [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250]

Specify whether or not to use the scanner only via the USB connection.

Disable the wired LAN connection if you want to use the scanner only via a USB connection for the following reasons.

  • Reducing power consumption

  • Enhancing the security

If this setting is changed, the scanner is restarted.

  1. Start up the Software Operation Panel.

    Refer to Starting Up the Software Operation Panel.

  2. From the list on the left, select [Device Setting 2] → [Network Function].
  3. Select [Disable] to use the scanner only via a USB connection.

    The factory default setting is [Enable].

    HINT

    • If [Enable] is selected for [Network Function], you can use the scanner either via a USB connection or a wired LAN connection.

    • [Network Function] appears when the Software Operation Panel is started up via a USB connection.