Performing a Scan with an Image Scanning Application

This section explains about the basic flow of performing a scan using an image scanning application on the computer.

In this case, a scanner driver and an image scanning application that supports the scanner driver must be installed on the computer.

The following scanner driver and image scanning applications are bundled with the scanner:

Scanner driver
- PaperStream IP driver
Image scanning application
- PaperStream ClickScan
- PaperStream Capture
- PaperStream Capture Pro (EVALUATION)

HINT

For details about the scanner driver and image scanning applications, refer to Overview of the Bundled Software.
Scanning procedures, operations, and scan setting items slightly vary depending on the scanner driver and the image scanning application.

For details, refer to the help for your scanner driver and the manual/help for your image scanning application.

Turn on the scanner.

For details, refer to How to Turn the Power ON.
Load a document in the ADF paper chute (feeder).

Load the document face-down in the ADF paper chute (feeder).

For details, refer to How to Load a Document in the ADF Paper Chute (Feeder).
Start an image scanning application.
Select a scanner driver to be used for scanning.

For some image scanning applications, selection of a scanner driver may not be needed.
Select the scanner to be used for scanning.

The scanner name depends on the scanner driver type and the scanner connection method. For details, refer to the help for the scanner driver.

For some image scanning applications, selection of the scanner may not be needed.

To use the scanner connected to a network, you need to select the scanner in Scanner Selection Tool beforehand.

For details about how to start up Scanner Selection Tool, refer to Starting Up Scanner Selection Tool [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250].
In the setup window for the scanner driver, configure the scan settings.

For some image scanning applications, the setup window for the scanner driver may not appear.
Scan the document with the image scanning application.

ATTENTION

Do not perform any of the following operations.

Doing so stops a scan.