How to Guide Documents

Adjust the stacker extension to the length of the document, and pull up the paper stop.
ATTENTION
- Do not hold the paper stop when you pull out the stacker extension because it may break.
- Make sure that the position of the paper stop is set longer than the document length.
  
  You can align the documents neatly by leaving a small gap between the paper stop and the documents.
HINT

Use the paper stop (small) when the document length is short. Lift up the paper stop (small) to about 130 degrees from the stacker level.

To scan documents longer than A3 size, pull out the hopper extension and stacker extension all the way.

Also, make sure not to pull up the paper stop.
Adjust the stacker side guides to the width of the document.

ATTENTION

Make sure to set the distance between the stacker side guides longer than the document width.