Item Configurable in Function Selection

Item	Description	Setting	Factory Default
Function Selection	Configure the application(s) to be launched by the [Send to] button. It displays the scanner button events configured in the computer ([Send to 1] to [Send to 50]). For information on how to configure scanner button events, refer to Using a Button on the Scanner to Start Scanning.	No.01 to No.50/No.C (No.C indicates the Software Operation Panel.)	(*1)

Item

Description

Setting

Factory Default

Function Selection

Configure the application(s) to be launched by the [Send to] button.

It displays the scanner button events configured in the computer ([Send to 1] to [Send to 50]).

For information on how to configure scanner button events, refer to Using a Button on the Scanner to Start Scanning.

No.01 to No.50/No.C

(No.C indicates the Software Operation Panel.)

(*1)

*1:	Although there is no factory default setting, it is set to [No.01] when you turn on the power. Therefore, the setting does not change even when you initialize the operator panel.