Specifying the Sensitivity Level for Paper Protection [Paper Protection Sensitivity]

Specify the sensitivity level for detecting feeding errors when the paper protection function is enabled.

Documents are warped and deformed or paper jam noise is made when documents are not being fed properly.

Specify the sensitivity level for detecting deformed documents by warpage or feeding noise.

Start up the Software Operation Panel.

For details, refer to Starting Up the Software Operation Panel.
From the list on the left, select [Device Setting 2] → [Paper Protection Sensitivity].
Select a detection method.

Feeding Accuracy

This is available when [Detect] for [Paper Protection] is either [Feeding Accuracy] or [Feeding Accuracy & Noise].

Feeding Noise

This is available when [Detect] for [Paper Protection] is either [Feeding Noise] or [Feeding Accuracy & Noise].
Select the sensitivity level.
Low

Decreases the sensitivity level to detect warped documents or paper jam noise.

Specify this to only detect highly deformed documents by warpage or loud paper noise.

Normal

Detects warped documents and paper jam noise with the optimum sensitivity.

This is the factory default setting.

High

Increases the sensitivity level to detect warped documents or paper jam noise.

Specify this to detect even slightly deformed documents by warpage or slight paper jam noise.
HINT
- To detect warped documents or paper jam noise immediately and stop the scan, select [High].
- If scanning stops frequently due to the paper protection function, select [Low].
- When the setting is to prioritize the touch screen setting, the touch screen setting is prioritized over the Software Operation Panel setting.