When the scanner is connected to a network via Wi-Fi or a wired LAN, the network connection status can be checked.

• Connected via Wi-Fi

  Use [Wi-Fi Diagnosis] to check the status of the connection with a wireless access point.

  After confirming that the connection is established with a wireless access point, check the status of the connection with the computer or the server by using [Check connection (Ping)].

• Connected via a wired LAN

  Use [Check connection (Ping)] to check the status of the connection with the computer or the server.

Checking with [Wi-Fi Diagnosis]

1. Press on the touch screen.

2. Press the [Diagnosis] button in the [Wi-Fi Diagnosis] screen.

   The diagnosis is displayed.

   Take measures according to the displayed message.

Checking with [Check connection (Ping)]

1. On the touch screen, press → [Scanner Settings] → [Network] → [Check connection (Ping)].

2. Enter a host name or an IP address for the destination in the [Check connection (Ping)] screen.

   HINT

   When you check the status of the connection with the computer or the server by entering a host name, the DNS server needs to be set on the scanner.

3. Press the [Run] button.

   The connection test result is displayed.

   For details, refer to Connection Test Result.