Pulls and feeds the documents one sheet at a time from the ADF paper chute (feeder).

Open this to replace consumables or to clean the inside of the scanner.

Pull out to adjust to the document length.

Pull out to adjust to the document length.

Holds the documents to be scanned.

Positions the documents in place when the documents are loaded in the ADF paper chute (feeder) as they are fed into the scanner.

Pull this tab to open the ADF.

Lights, flashes in orange, or turns off when an error occurs.

For details, refer to About the Indicators.

Lights in green when the scanner is on.

Flashes in the following cases:

• Immediately after the scanner is turned on

• Just before the scanner turns off after pressing the power button

• When the ADF paper chute (feeder) is closed

Launches the linked application software.

Stops a scan immediately in the middle of a scan.

Clears the temporary error indicated on the check indicator.

Turn on/off the scanner.

Consists of the check indicator, power indicator, scan/stop button, and power button.

Stacks up the ejected documents.

Lift up towards you to adjust to the document length.

Used to connect a power cable.

"Power cable" refers to the plug and AC adapter connected together.

Used to connect the USB cable.

Used to connect a LAN cable.

Holds the documents to be scanned.

A roller which feeds documents loaded on the ADF paper chute (feeder) into the ADF.