Setting Up the ADF Paper Chute (Feeder)

Documents loaded in the ADF paper chute (feeder) are fed into the ADF one by one when scanning starts.

Using the chute extensions 1 and 2 as described in the following procedure will feed documents smoothly.

  1. Pull out the chute extension 1.
    Pulling Out the Chute Extension 1
    HINT

    Make sure you hold the ADF paper chute (feeder) while pulling out the chute extension 1.

  2. Pull out the chute extension 2.
    Pulling Out the Chute Extension 2
    HINT

    Make sure you hold the ADF paper chute (feeder) while pulling out the chute extension 2.