*1：	Replace the print cartridge only when the imprinter is installed.

Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables and replace them before it reaches the end of the consumable life. The scanner records the number of sheets scanned for each consumable (pick roller, separator roller, and brake roller) and the amount of remaining ink (print cartridge), which allows you to determine when to replace consumables.

Use one of the following methods to check the number of sheets that have been scanned and the amount of remaining ink.

• The [Replacement of the Pick Roller] screen on the touch screen (displayed when the time for replacement is approaching)

  Check the information about consumable parts.

  The screen can be displayed in the following procedure:

  → → [Replacement of the Pick Roller]

• The [Replacement of the Separator Roller] screen on the touch screen (displayed when the time for replacement is approaching)

  Check the information about consumable parts.

  The screen can be displayed in the following procedure:

  → → [Replacement of the Separator Roller]

• The [Replacement of the Brake Roller] screen on the touch screen (displayed when the time for replacement is approaching)

  Check the information about consumable parts.

  The screen can be displayed in the following procedure:

  → → [Replacement of the Brake Roller]

• The [Remaining Ink] screen on the touch screen (displayed when the time for replacement is approaching)

  Check the information about consumable parts.

  The screen can be displayed in the following procedure:

  → → [Remaining Ink]

• The [Consumable counters] screen on the touch screen

  Check the information about consumable parts.

  • When the background color of the counter is green

    It is not time to replace the consumable yet.

  • When the background color of the counter is yellow

    It is about time to replace the consumables.

  • When the background color of the counter is red

    It is time to replace the consumables. Replace them.

  The screen can be displayed in the following procedure:

  → [Scanner Settings] → [Cleaning & Maintenance] → [Consumable counters]

• Software Operation Panel

  For details, refer to Clearing the Sheet Counters.

Note that the suggested replacement cycles are guidelines for using A4 (80 g/m² [20 lb]) wood-free or wood-containing paper, as these cycles vary depending on the type of documents scanned, how often the scanner is used and cleaned, and your operating environment.

For information on purchasing the consumables, contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an inquiry.

Please note that some parts (other than the consumables) need to be replaced by a service engineer, depending on the type of documents scanned and how often the scanner is used. For instance, maintenance parts need to be replaced by a service engineer.

For details about maintenance parts, contact a service engineer. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an inquiry.