Connecting the Scanner via a Wired LAN in Order to Operate It with a Computer (When Assigning an IP Address Manually) [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250]

This section explains about the setup procedure for you to connect the scanner to a network device via a wired LAN in order to operate the scanner with a computer and manually assign an IP address to the scanner.

For the procedure to unpack the scanner, refer to Getting Started.

ATTENTION

If an old version of the software is installed, uninstall it first.

For the procedure to uninstall the software, refer to Uninstalling the Software.

  1. Turn on the computer and log onto Windows as a user with administrator privileges.
  2. Insert the Setup DVD-ROM into the DVD drive.

    The [fi Series Setup] window appears.

    HINT

    If the [fi Series Setup] window does not appear, double-click "Setup.exe" in the Setup DVD-ROM via [File Explorer] or [Computer].

  3. Click the scanner model name to be used (if the window for selecting a model name is displayed).
  4. Select either [Installation (Recommended)] or [Installation (Custom)].

    • For [Installation (Recommended)]

      Select [Installation (Recommended)] to install all the software required to operate the scanner.

      1. Click the [Installation (Recommended)] button.

        Setup Window

      2. Install the software by following the instructions displayed in the window.

        The [How to Connect the Scanner] window appears when the installation of the software is complete.

      HINT

      When [Installation (Recommended)] is selected, the following software is installed:

      • PaperStream IP (TWAIN)

      • Network Setup Tool for fi Series

      • Software Operation Panel

      • Error Recovery Guide

      • PaperStream ClickScan

      • PaperStream Capture

      • Manual

      • fi Series Online Update

      Note that Network Setup Tool for fi Series is installed for fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250.

    • For [Installation (Custom)]

      Select [Installation (Custom)] to select and install the software that you need.

      1. Click the [Installation (Custom)] button.

        Setup Window

      2. Check the displayed contents and click the [Next] button.

      3. Select the check boxes for the software to be installed and click the [Next] button.

      4. Install the software by following the instructions displayed in the window.

        The [How to Connect the Scanner] window appears when the installation of the software is complete.

  5. Select [Network].
    Network
  6. Connect the scanner to the computer as follows.
    Connecting a LAN Cable
    1. Connect the computer to a network device via a wired LAN or Wi-Fi (1).

      The procedure below shows an example of connecting the computer to a network device via a wired LAN.

      For details about how to connect the computer to the network, refer to your computer manual.

    2. Connect the scanner to the network device via a wired LAN (2).
    3. Connect the power cable to the scanner and the AC outlet (3,4).
    4. Turn on the scanner.

      For details, refer to How to Turn the Power ON.

  7. Click the [Select a Scanner] button in the [How to Connect the Scanner] window.

    The [Scanner Selection Tool] window appears.

  8. Click the [Set an IP Address] button.

    A message appears, prompting you to connect the scanner to the computer via the USB cable.

  9. Connect the scanner to the computer by using the USB cable that is supplied, and click the [OK] button in the message window.

    The login window for IP Address Setting Tool appears.

    HINT

    You do not need to disconnect the LAN cable from the scanner when connecting the USB cable.

  10. Enter the default administrator password and click the [Login] button.

    You can check the default administrator password by checking whether there is a label or not.

    For details about the label, refer to Checking the Product Label.

    The [IP Address Setting Tool] window appears.

  11. Set the IP address and the scanner name, and then click the [OK] button.

    For details about the IP Address Setting Tool, refer to the Network Setup Tool for fi Series Help.

    HINT

    The scanner name and the IP address that you set are displayed in the scanner list in Scanner Selection Tool.

  12. Disconnect the USB cable from the scanner.
  13. Click the [Search again] button in the [Scanner Selection Tool] window to search for the scanner that you want to use.

    The scanner is not displayed in the scanner list right after setting the IP address. Search for the scanner by clicking the [Search again] button.

    For details about Scanner Selection Tool, refer to the Network Setup Tool for fi Series Help.

  14. In the scanner list, select the check box for the scanner that you want to use.
  15. Click the [OK] button to close the [Scanner Selection Tool] window.
  16. Click the [Exit] button in the [fi Series Setup] window.
  17. Check whether the scanner is ready to start scanning.

    For details, refer to How to Perform a Basic Scan.

HINT