Set this item to operate the scanner with PaperStream NX Manager.

Click [PaperStream NX Manager] under [Linking with Server] to display the window.

[Enable] check box

Specify whether to operate with PaperStream NX Manager.

The check box is cleared for the factory default setting.

If you select the check box, also set the following items.

• Host Name/IP address

  ATTENTION

  An IPv4 address is supported.

  Note that an IPv6 address is not supported.

• Port Number

  The factory default setting is "20447".

• Auto Logout minutes [fi-8190/fi-8290/fi-8170/fi-8270]

  Specify a time (minutes) to automatically log out from PaperStream NX Manager if the scanner is left on for a certain period of time without being used.

  • Disabled (Never)

    This is the factory default setting.

  • 1

  • 2

  • 3

• Auto Login [fi-8190/fi-8290/fi-8170/fi-8270]

  Specify an auto login method for PaperStream NX Manager.

  • Disabled

    This is the factory default setting.

  • Job Group Code

  For details, refer to the PaperStream NX Manager User's Guide.

• [Enable Application (Internet)] check box

  Set this item when scanning with a user application on a computer or mobile device in an environment in which PaperStream NX Manager and a scanner are connected via the Internet.

  The check box is cleared for the factory default setting.

[Check connection] button

Check if the scanner can be connected to PaperStream NX Manager.

[Apply to the scanner] button

Applies the configured settings.