Admin Password

Change or disable the administrator password.

Specify whether or not to disable the administrator password depending on the operation.

Change the administrator password regularly.

Click [Admin Password] under [Maintenance] to display the window.

Current Password

Enter the current password. If you have not set an administrator password, leave the field blank.

You can check the default administrator password by checking whether there is a label or not.

For details about the label, refer to Checking the Product Label.

New Password

Enter a new password within 16 characters to change the current password. If you do not want to set an administrator password, leave the field blank.

The following characters can be used for a new password:

  • Alphanumerical characters

  • Space

  • Symbols

    -/:;()Yen Mark&@".,?!'#%^*+=_|~<>$[]`{}

  • Diacritics

    èéêëÈÉÊËùúûüÙÚÛÜìíîïıÌÍÎÏİòóôõöœÒÓÔÕÖŒàáâãäæÀÁÂÃÄÆşŞğĞçÇßñÑ

Confirm New Password

Re-enter the password entered for [New Password] for confirmation to change the current password.

[Apply to the scanner] button

Applies the configured settings.