Sensor Error
If a sensor error occurs, the following is displayed on the operator panel.
For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code
Error Details and the Solution
L0:11
L0:11 Error
Sensor error
Turn the power back on. If the problem persists, refer to the Operator's Guide and take measures accordingly.
L2:13
L2:13 Error
Sensor error
Turn the power back on. If the problem persists, refer to the Operator's Guide and take measures accordingly.
L5:17
L5:17 Error
Sensor error
Turn the power back on. If the problem persists, refer to the Operator's Guide and take measures accordingly.
L5:18
L5:18 Error
Sensor error
Turn the power back on. If the problem persists, refer to the Operator's Guide and take measures accordingly.
L6:1B
L6:1B Error
Sensor error
Turn the power back on. If the problem persists, refer to the Operator's Guide and take measures accordingly.
For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number Display.
Error Code
Error Details (displayed in the Error Recovery Guide window)
L0
Sensor error
L2
L5
L6
Take the following measures.
Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth to clean the ultrasonic sensors.
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in Before You Contact the Scanner Service Provider and then contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an inquiry.