Cleaning the Inside of the Scanner

The inside of the scanner can be cleaned with a piece of cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe.

Cleaning should be performed approximately every 1,000 sheets scanned.

ATTENTION

  • Do not use water or mild detergent to clean the scanner.

  • It may take a long time to dry if an excessive amount of Cleaner F1 is used. Use only a small amount. Wipe off the cleaner completely to leave no residue on the cleaned parts.

  1. Open the document cover.

    For details, refer to How to Open the Document Cover.

  2. Clean the following locations with a cloth moistened with Cleaner F1, or a sheet of Cleaning Wipe.
    Cleaning the Inside of the Scanner
    ATTENTION

    Be careful not to let the cleaner in between the document bed and the plastic frame.

  3. Wait for the cleaned parts to dry.
  4. Close the document cover.

    For details, refer to How to Close the Document Cover.