Connecting to a Wireless Access Point by Entering the PIN for WPS

  1. In the screen for selecting a configuration method, select [Use WPS] and press the [Next] button.
  2. Check the setting items and the order of them, and then press the [Start] button.

    The screen for selecting the method with the WPS function is displayed.

  3. Select [PIN] and press the [Next] button.

    The operation guidance screen is displayed.

  4. Note down the PIN that is displayed in the screen.
  5. On the computer, open the setting window for WPS of the wireless access point.

    For details about WPS, refer to the manual of your wireless access point.

  6. Specify the PIN which you noted down to have it ready to connect to the scanner.
  7. Go back to the touch screen and press the [Next] button within two minutes.

    When the connecting process is complete, the connection result is displayed.

  8. Press the [Next] button.

    Specify each item.

    Refer to step 4 in When Connecting the Scanner via Wi-Fi.