When Establishing a Connection by Entering the Information for the Wireless Access Point

  1. In the screen for selecting a configuration method, select [Configure manually] and press the [Next] button.
  2. Check the setting items and the order of them, and then press the [Start] button.

    The setting screen for a wireless access point is displayed.

  3. Enter the information for the wireless access point.

    Enter the following:

    The information that you enter varies depending on the wireless access point that you want to connect to.

    • Network name (SSID)

    • Security protocol

    • Security key

    • Encryption method

    • Authentication Method

    • User ID

    • Password

    • Other necessary information for connecting to a wireless access point

  4. After you finish entering the necessary information, press the [Next] button.

    When the connecting process is complete, the connection result is displayed.

  5. Press the [Next] button.

    Specify each item.

    Refer to step 4 in When Connecting the Scanner via Wi-Fi.